SuperRat ES Engine and a 26" HD axle wheel set up for MULTI-SPEED bikes
This add is for a SR 70cc Engine plus a HD Axle Wheel made for 150 to155mm dropout multi-speed application..
Includes the following items:
NOTE: ITEMS NOT INCLUDED due to so many different variations: Left side Engine Drive Chain Sprocket, / Right side Multi Speed 1.375-24 screw on pedal sprocket cluster / Optional 5 hole Freewheel sprocket hub / Disc Brake rotor / Engine installation kit that has > carburetor, tank, chain, muffler, muffler, clutch lever & throttle and other misc. items.
Included: SuperRat 70cc 3 HP 2 cycle pedal and electric drill start engine contractually made by Nantong JaiLi to Gru-Bee specification.
Included: OCDT is included for hand held electric starting with 20V battery powered 1/2" drill.
Included: A big downtube front mounting U bracket is included.
Included: SR Engine has built in integral ignition system and 6203 big bearing crankshaft.
Included: 26" HD Axle wheel rim with our HD Axle and pre-laced with 12ga chrome spokes. Ready for drop in.
Included: A 6 hole CCW screw on solid steel hub is included for attaching a disc brake rotor.
This wheel is made for multi-speed bikes with 150 to 155mm wide rear frame drop outs for 5 or 6 speed multi-speed cluster. ( Multi Speed screw on cluster is not included. )
Not Included: A 36-1 CCW screw on Freewheel 5 Hole Hub for 4 cycle rope pull start engines is available as a separate purchase item.
Not Included: 36T to 56T engine drive chain sprockets must be ordered separately; The more teeth a sprocket has the slower the speed but the higher the torque.
When building a motorized bike the most critical process is true alignment and securement of the drive sprocket on the rear wheel when using the standard rubber donuts clamp to spokes sprocket installation method. Yes, it is the CHEAPEST WAY BUT FAR FROM THE MOST ACCURATE AND SAFEST WAY TO DO IT. When developed in the 1950's the Chinese had no money to spend for a better way. Today is 2020 and things are different.
We have the solution. The HD axle saves your time and provides the most secure and accurate way to install a DRIVE SPROCKET on a solid screw on 6 hole hub and also enables having disc brakes.
The hub axle has dual ball bearings with double row sealed bearings and that means heavy duty long life!
Nest comes the engine: The 70cc SuperRat engine is equipped with integral CDI and 6203 size crankshaft bearings instead of the smaller 202 size found in other engines.
The exclusive ES engine feature is the ability to hand hold a 1/2" 20V battery powered drill and start the engine effortlessly by using our OCDT. Only found on Gru-Bee contractual engines.