1A Transmission and INSTALLATION KIT
T-Belt drive runs much more quieter than a chain drive!
This kit has our 1A most popular 4G T Belt drive transmission! Includes an installation kit to install engine and transmission on a V frame bicycle
Single speed gets 30mph max. For Multi-Speed see our other adds.
THIS PACKAGE COMES WITH AN INSTALLATION KIT TO INSTALL ON A HUASHENG 49cc or 53cc 4 STROKE ENGINE AND THEN ONTO A V FRAME BICYCLE.
Everything you need to make a 4 cycle engine powered bike EXCEPT BIKE AND ENGINE.. ORDER ENGINE SEPERATELY.
Donor bike is furnished by customer. Can fit most 26" cruiser bikes.
Must use either a Huasheng 49cc 142F-1G or 53cc 144F-1G engine with OEM built- in 3 shoe centrifugal clutch affixed to a crankshaft tapered end.
WARNING: Be careful to NOT use a counterfeit engine as we do not guarantee fitting on look alike fake engines like can be found on eBay under various private label names. Use an authentic HuaSheng engine only!
NOTE: 1A transmissions will Not fit 5/8" straight shaft engines.
NOTE: ENGINE and BICYCLE ARE NOT INCLUDED with this add package!
Peak-a-boo belt guard allows placing LED lights in the pulley holes that can turn on when pulley rotates.
Wide pedal kit comes with a conversion kit to allow mounting in a bicycle frame big bottom hole made for one pcs cranks or also can be installed in a small bottom hole made for a 3 pcs crank.
Rear wheel chain sprocket clamps to spokes which is the standard economy method! However, we do recommend using the optional HD Axle #2 for pro-shop results and safety concerns but sold separately.
Engine bracket has slide end pieces that allow length adjustments to fit many bike V frame width variations.
List of parts included in this KIT: This what you get!
- Instruction manual
- 1A Transmission 20T/80T pulleys with 9T and 10T slide sprockets.
- Twist grip throttle handle w/ kill swt.
- Throttle cable
- 415 chain
- Black 2.5L tear drop gas tank plated inside to prevent rusting.
- 48T sprocket and clamp to spokes Installation kit.
- Wide pedal kit. ( Fits big or small bottom hole )
- Spanner wrench for belt tension adjusting.