EXACT REPLACEMENT FOR THE BABY REDFIELD 4X 3/4" tube scope.

WP-5A > 3/4" Tube WolfPup 4X-24           - High End Precision Scope - 

Elevation DUPLEX Reticle.   

NOTE::: Fixed Power 4X means your zero stays put!  

WP-AB low rings are included with this scope as well as lens covers.   

To substitute WP-AH HIGH 3/8 dovetail rings or WP-B Rings for Picatinny just leave a note to seller. 

For use on the Winchester XPERT 22 use our one piece 6" long 3/8" dovetail base.  

For use on a Browning SA semi auto 22 use our barrel mount cantilever base ID to what Redfield made. 

For use on the New Savage Revel lever action 22 use our Savage Revel dovetailed base. 

To substitute rings, leave us a note to seller at Check Out.   You can choose WP-A, WP-B, WP-AH or WP_CZ rings.

9-1/4" long   5.8 oz. wt. 

For fitting, please know 4-1/2" is the tube length measurement between Ocular and Objective bells.   

NOTE:  Our WolfPup scopes do not fit the old Weaver 3/4" side steel N mounts without grinding out 1/8"x1" clearance midway between rings to allow scope turret fit.  Receiver drill and tapping must allow 1/16" to 3/32" clearance between Weaver mount and top of the gun's receiver, cannot touch receiver.  

WP-3 scope is an Adult scope with 4" eye relief suitable for 14" to 13-1/2" trigger pull.   Rear ring mount must be 1" forward of the trigger. 

FYI:  WolfPup 4" eye relief scopes are Not for youth rifles with short 11" to 12" trigger pulls for which our FoxPup 3"to 2.7" eye relief scope is better suited.   

NOTE:  Our FoxPup scopes with nominal 3" eye relief are more suitable for lever action rifles like Winchesters, Henry's, and Browning's that can mount the rearward scope ring directly over the trigger.   

3" Rule of Thumb. If the rear scope ring sets directly above the trigger than it's best to use a 3" eye relief scope. 

4" Rule of Thumb.  If the rear scope ring sets 1" or more forward of the trigger than it's best to use a 4" eye relief scope. 

4X Wolf Pups are an Exact Replacement for the baby Redfield 4X made long ago in Denver CO. 

This WolfPup scope includes WP-AB 3/8" dovetail Low rings as standard:   WP-AH high mount is best suited for the Win. M-94/22 due to rear sight leaf clearance needed. 

To substitute rings give us a note to seller at check out.   You can choose WP-A, WP-B, WP-AH or WP-CZ rings at no extra charge. 

Includes lens covers.   

3/4" tube small scope made for a 22 rifle.    Look right / Shoots Right and Feels right on small frame 22's. 

Same approx. dimensions as the Baby Redfield called the "Westerner" first introduced to market in 1974.

8 Fully Multi Coated Lens, ( Green tint, not the cheap blue tint )

1/4" MOA clicks at 50 yds.  

Original baby Redfield only had a smooth turn turret adjustment, no clicks.

4-inch eye relief.   40 to 50 yd. set parallax.    

9 1/4" long   5.8 oz. wt.

Bright high luster black finish like the original baby Redfield.

Comes complete with WP-AB 3/8" dove tail LOW ring mounts.

Some bolt action 22 guns may require WP_AH High rings for bolt handle clearance during lift.   

Ask us any questions first if you need application advise.   We know a lot but only God knows everything.  

Guaranteed with our LIMITED LIFETIME WARRANTY against defects.  

FREE SHIPPING IN THE USA ONLY. 

Sorry, Due to US Dept of Commerce ruling we cannot ship riflescopes out of the USA.

We warmly welcome and appreciate customer feedback.   Let us know what you're thinking.  Check out our 5-page magazine article published in 2024 edition of RIMFIRE magazine.   

OVERPRICED IS A MISNOMER!  Our Wolf Pup scopes are not intended to compete with any existing brand over the counter 4X scope, Nor are they competing with big 1" variable power scopes.   

Our intended niche market is to offer an exclusive alternative to buying a used, no longer made, no warranty, baby 4X Redfield Westerner ¾” tube scope. 

FYI:  Baby Reds sold for $29.95 in 1964 and today for over $250 on eBay with limited reticle and ring choices.     

Gru-Bee spent 80,000 USD in tooling cost and 3 years of personal engineering time at the factory in China developing our Wolf Pup and Fox Pup scopes and rings.  

 Contract Production is in a humidity and dust free controlled type lab environment.  Scope tubes are made with high luster black finish like the original baby Reds. 

Wolf Pup scopes are assembled by ladies using magnetifying glasses to install the smaller turret and erector tube components.  Nitrogen gas filled.  Reticles set to mechanical center via Collimator instrumentation.  Shock load tested at 1000 G’s to ensure design for rimfire but strong enough for centerfire.  

Bottom Line;  Looks right, Shoots right, and Feels right on small frame rimfire rifles.    Turns a little Browning SA 22 semi-auto rifle into a squirrels' worst nightmare!

Therefore, if you are knowledgeable in scope use, I fail to see any REDFIELD value maintained.    Yes, we bought many to determine how to make a better one and we did. 

  Every scope has a clock in it.   

  Over time scopes will eventually lose gas fill, and interior components will contaminate,  ie: O-rings and springs, reticle and glass coating degradation. 

  The last Baby Redfield scope was made in 1998, first one was made in 1964.     

  If you were to buy the last one made  Baby Redfield it be 27 years old at minimum or perhaps 65 years old at maximum age if made in 1964. 

 Used Redfield scopes carry no warranty.    You get what you get.   Ours have lifetime limited warranty.  

 Many people have told us they bought a used Redfield and had to have it repaired by a scope rebuilder.  

  Baby Redfield scopes have no E & W MOA click adjustments, but Gru-Bee WolfPup and FoxPups do have. 

 Baby Red Redfield scopes have limited reticle choices and mounting ring choices.  We have both AO/FF 4X scopes and Standard 4X scopes, 4 ring choices and 5 reticle choices.  

Our scopes are currently made in a contracted scope factory in my wife's hometown in China.  However, as soon as we can get a government duty-free import concession for all the component pieces, our scopes will then be assembled in our Durant OK. location. 

The US Gov has been our biggest problem.   We wanted to assemble, test and package our scopes here in Durant OK but Uncle Sam desired to place a 55% duty on components.   We think Import Duty should be place on complete finished products but allow USA assembly with duty free components as a concession to Make America Great Again.    Ask your Congressman and Senator to eliminate component parts TARIFF and increase TARIFF on finished products from China.    MAGA!!!!

Read about us in RimFire 2024 magazine and GUNS 2019 July magazine.   Our monthly ad appears in Firearms News 

Disclaimer:   Due to the intrinsic nature of fine adjustment optics that can be damaged by improper installation, or improper adjustment, riflescopes are NOT returnable for refund.  However, Scope Returns are allowed for any Gru-Bee Lifetime Warranty defect repair or replacement.