SKYHAWK AVENGER 85-ES standard TOTAL KIT with OCDT

$279.95

Sorry, this item is out of stock

← Previous Product Next Product →

SKYHAWK AVENGER 85-ES TOTAL KIT: Made by, (YD), YuanDong.

Standard Avenger 85 kits are now all gone. James Kroger bought the last one.

We will no longer offer Avenger 85 engines or any 2 stroke engines after our present stock is sold out! All we have left now are a few Gt5A-ES 66cc engine kits.

Here's the sad news!

Sad News; Due to the poor state of affairs with China and high USA Tarrifs, we we will not be supplying any more Avenger 85 engine kits after our present stock is gone. In addition we believe China Doll two stroke engine power has now exceeded safe limits for ordinary bicycle use thus causing too many deaths and injuries nationwide. China has banned their use and therefore we feel USA will soon do the same. However, we will continue to have service parts available as long as our parts stock last.

FYI: Our Avenger 85 engines have Easy Drill Start OCDT function capability. Not available anywhere else. OCDT = OverRunning Clutch Drive Tool.

To start your engine with a handheld 20V 1/2" Drill you must use an OCDT drive tool sold separately here-in.

This ad is for our "Plane Jane standard SkyHawk A85 TOTAL KIT.

Everything you'll need except the bike.

Gru-Bee's "RED DEVIL" CDI Ignition is included.

Includes BoFang Carburetor and factory riveted 2 lb. muffler.

Regardless as to what some people may say YuanDong is the exclusive CHINESE manufacture of the Avenger 85 engine. The same factory that has always made our SkyHawk line of 2 stroke engines for over 21 years. Look for the YD logo on the crankcase to ensure authenticity. Other Chinese factories will soon learn to copy the YD Avenger 85 design.

INCLUDES THE STANDARD PEDAL START FEATURE AND ALSO HAS OUR EXCLUSIVE RIGHT SIDE FLIP WINDOW ENTRY FOR OCDT CORDLESS DRILL ELECTRIC ENGINE STARTING WHICH IS A GRU-BEE EXCLUSIVE FEATURE.

NOTE: For these last 2 engine kits our OCDT TOOL IS INCLUDED, previously SOLD SEPERATELY.

The Avenger 85 > 52x40 is a true 85cc displacement ENGINE and with correct tune it's capable of reaching speed of 50 MPH!!!

52mm bore and 40mm stroke.

Yes, this engine competes directly with OLYIN Avenger85, CDH YD85, Menace85 and the Phantom85 sold by our friendly competitors.

The engine retains the stock 25-degree timing and includes the "Hot" Red Devil ignition.

SkyHawk Avenger 85 Features:

SKYHAWK AVENGER 85 features:

My Wife's retired brother inspects at the factory what you expect and yes that's not 100% perfect but it's a lot better than no inspection at all when you consider China's piece worker's pay is the same for making defects as it is for making zero defects.

SKYHAWK AVENGER 85-ES standard TOTAL KIT with OCDT

GruBee Inc

SKYHAWK AVENGER 85-ES TOTAL KIT: Made by, (YD), YuanDong.

Standard Avenger 85 kits are now all gone. James Kroger bought the last one.

We will no longer offer Avenger 85 engines or any 2 stroke engines after our present stock is sold out! All we have left now are a few Gt5A-ES 66cc engine kits.

Here's the sad news!

FYI: Our Avenger 85 engines have Easy Drill Start OCDT function capability. Not available anywhere else. OCDT = OverRunning Clutch Drive Tool.

To start your engine with a handheld 20V 1/2" Drill you must use an OCDT drive tool sold separately here-in.

This ad is for our "Plane Jane standard SkyHawk A85 TOTAL KIT.

Everything you'll need except the bike.

Gru-Bee's "RED DEVIL" CDI Ignition is included.

Includes BoFang Carburetor and factory riveted 2 lb. muffler.

INCLUDES THE STANDARD PEDAL START FEATURE AND ALSO HAS OUR EXCLUSIVE RIGHT SIDE FLIP WINDOW ENTRY FOR OCDT CORDLESS DRILL ELECTRIC ENGINE STARTING WHICH IS A GRU-BEE EXCLUSIVE FEATURE.

NOTE: For these last 2 engine kits our OCDT TOOL IS INCLUDED, previously SOLD SEPERATELY.

The Avenger 85 > 52x40 is a true 85cc displacement ENGINE and with correct tune it's capable of reaching speed of 50 MPH!!!

52mm bore and 40mm stroke.

Yes, this engine competes directly with OLYIN Avenger85, CDH YD85, Menace85 and the Phantom85 sold by our friendly competitors.

The engine retains the stock 25-degree timing and includes the "Hot" Red Devil ignition.

SkyHawk Avenger 85 Features:

Included is our HIGH FLUX DENSITY NEODYMIUM TZ ROTOR MAGNET IDENTIFIED BY THE EXCLUSIVE Diamond CROSSHATCH PATTERN.

Included is our ALL RED TZ CDI with HIGHER MICROFARD CAPACITIOR FOR INCREASED AVAILABLE VOLTAGE TO THE SPARK PLUG.

Included is our FINE WIRE HP TZ MAGNETO COIL THAT SPECS OUT @ 440 TO 450 OHMS.

SKYHAWK AVENGER 85 features:

Stock cast aluminum head with special 3 pt spark plug.

Engine starting OCDT compatible

Gru-Bee High Performance RED DEVIL Ignition

BoFang Carburetor replaces the old NT carb of years past.

52MM DIA. SINGLE RING FLAT TOP PISTON.

12MM DIA. WRIST PIN

NEEDLE BEARING on Wrist pin.

IMPROVED HIGH SPEED CRANK NEEDLE BEARING.

4 HOLE X 2 BALLANCED CRANK.

SPECIAL HARDENED B5 CRANKSHAFT BEVELED GEAR

COPPER HEAD GASKET.

HEAVY DUTY CLUTCH SPRING.

INCLUDES HIGH QUALITY Vitron SEALS AND BALL BEARINGS.

YuanDong 2 PIECE RIVETED MUFFLER

My Wife's retired brother inspects at the factory what you expect and yes that's not 100% perfect but it's a lot better than no inspection at all when you consider China's piece worker's pay is the same for making defects as it is for making zero defects.

SKYHAWK AVENGER 85-ES standard TOTAL KIT with OCDT

GruBee Inc

SKYHAWK AVENGER 85-ES TOTAL KIT: Made by, (YD), YuanDong.

Standard Avenger 85 kits are now all gone. James Kroger bought the last one.

We will no longer offer Avenger 85 engines or any 2 stroke engines after our present stock is sold out! All we have left now are a few Gt5A-ES 66cc engine kits.

Here's the sad news!

FYI: Our Avenger 85 engines have Easy Drill Start OCDT function capability. Not available anywhere else. OCDT = OverRunning Clutch Drive Tool.

To start your engine with a handheld 20V 1/2" Drill you must use an OCDT drive tool sold separately here-in.

This ad is for our "Plane Jane standard SkyHawk A85 TOTAL KIT.

Everything you'll need except the bike.

Gru-Bee's "RED DEVIL" CDI Ignition is included.

Includes BoFang Carburetor and factory riveted 2 lb. muffler.

INCLUDES THE STANDARD PEDAL START FEATURE AND ALSO HAS OUR EXCLUSIVE RIGHT SIDE FLIP WINDOW ENTRY FOR OCDT CORDLESS DRILL ELECTRIC ENGINE STARTING WHICH IS A GRU-BEE EXCLUSIVE FEATURE.

NOTE: For these last 2 engine kits our OCDT TOOL IS INCLUDED, previously SOLD SEPERATELY.

The Avenger 85 > 52x40 is a true 85cc displacement ENGINE and with correct tune it's capable of reaching speed of 50 MPH!!!

52mm bore and 40mm stroke.

Yes, this engine competes directly with OLYIN Avenger85, CDH YD85, Menace85 and the Phantom85 sold by our friendly competitors.

The engine retains the stock 25-degree timing and includes the "Hot" Red Devil ignition.

SkyHawk Avenger 85 Features:

Included is our HIGH FLUX DENSITY NEODYMIUM TZ ROTOR MAGNET IDENTIFIED BY THE EXCLUSIVE Diamond CROSSHATCH PATTERN.

Included is our ALL RED TZ CDI with HIGHER MICROFARD CAPACITIOR FOR INCREASED AVAILABLE VOLTAGE TO THE SPARK PLUG.

Included is our FINE WIRE HP TZ MAGNETO COIL THAT SPECS OUT @ 440 TO 450 OHMS.

SKYHAWK AVENGER 85 features:

Stock cast aluminum head with special 3 pt spark plug.

Engine starting OCDT compatible

Gru-Bee High Performance RED DEVIL Ignition

BoFang Carburetor replaces the old NT carb of years past.

52MM DIA. SINGLE RING FLAT TOP PISTON.

12MM DIA. WRIST PIN

NEEDLE BEARING on Wrist pin.

IMPROVED HIGH SPEED CRANK NEEDLE BEARING.

4 HOLE X 2 BALLANCED CRANK.

SPECIAL HARDENED B5 CRANKSHAFT BEVELED GEAR

COPPER HEAD GASKET.

HEAVY DUTY CLUTCH SPRING.

INCLUDES HIGH QUALITY Vitron SEALS AND BALL BEARINGS.

YuanDong 2 PIECE RIVETED MUFFLER

My Wife's retired brother inspects at the factory what you expect and yes that's not 100% perfect but it's a lot better than no inspection at all when you consider China's piece worker's pay is the same for making defects as it is for making zero defects.