Baby Redfield replacement WP-1A 3/4" WolfPup 4X Duplex Dot Scope with high rings & lens covers

GruBee

$169.95 

  • WP-1A >  WolfPup 4X-24 RimFire Scope                    Duplex Dot Reticle.          

    • 4-inch eye relief.   NOTE: For 3-inch eye relief use WP-2A, WP-3A or WP-5A scope. 

    • Includes WP-AH high rings.

    • 50 yd. parallax   

    • 9-1/4" long   5.8 oz. wt. 

    • For rifle fit please know 4-1/2" is the tube length measurement between Ocular and Objective bells.   

    • NOTE: Our WolfPup scopes do not fit the old Weaver 3/4" side mounts without grinding out clearance midway on the mount base to allow scope turret fit.    

    WP-1 scope is an Adult scope with 4" eye relief suitable for 14" to 13-1/2" trigger pull. 

    4" eye relief scopes are Not for youth rifles with short trigger pulls for which our FoxPup scope is better suited.   

    Also, FoxPup and WolfPup AO 3" eye relief scopes are more suitable for lever actions that mount the rearward scope ring over the trigger.                 

    • WP-1A > WolfPup Duplex Dot 4X-24 Scope with WP-AH High rings and lens covers.   

    • Exact Replacement for the baby Redfield 4X made long ago in Denver CO.

    • Includes WP-AH 3/8" dovetail high rings as standard:   To substitute rings give us a note at check out.   You can Choose WP-A, WP-B, WP-AB or WP-CZ. 

    • Includes lens covers.

    • 3/4" tube small scope made for a 22 rifle.    Look right / Shoots Right and Feels right on small frame 22's. 

    • Same dimensions as the Baby Redfield called the "Westerner".

    • 8 Fully Multi Coated Lens, ( Green tint, not the cheap blue tint )

    • 1/4" MOA clicks at 50 yds.  

    • Original baby Redfield only had a smooth turn turret adjustment, no clicks.

    • 4-inch eye relief   50 yd. parallax    9 1/4" long   5.8 oz. wt.

    • Bright high luster black finish like the original baby Redfield.

    • Comes complete with WP-AH 3/8" dove tail HIGH ring mounts for 22 grooved receivers.

    • Ask us any questions first if you need application advise. 

    • Satisfaction guaranteed.  

    • FREE SHIPPING IN THE USA ONLY. 

    • We warmly welcome and appreciate customer feedback.   Let us know what you're thinking. 

    Logic to consider if you want a shootable scope to use.   However, if you want a non-shooter show case antique, then yes, buying an old Baby Redfield may have merit.     

    Prices of used Baby Redfield 4X scopes have gone from $250 10 years ago on eBay for one in like new condition down to $150 today as was sold at the Wannemacher Gun Show in Tulsa last April 2023., Therefore, if you are knowledgeable in scope use, I fail to see REDFIELD value maintained.    Yes, we bought many to determine how to make a better one. 

    1.   Every scope has a clock in it.   

    2.   Over time all will eventually lose gas fill, and interior components contaminated,  ie: O-rings and springs, reticle and glass degradation. 

    3.   The last Redfield scope was made in 1998.     

    4.   If you were to buy a Baby Redfield from eBay that was the last one made your scope would be 25 years old at minimum or perhaps 50 years old at maximum age. 

    5.  Used Redfield scopes carry no warranty.    You get what you get.   Ours have lifetime warranty.  my lifetime, not the scopes! 

    6.  Many people have told us they bought a used Redfield and had to have it repaired by a scope rebuilder.    

    7.   Iron Sight Co. in Tulsa is a major scope rebuilder if it turns out you need their service.  ph. 918 306 0514     Mike Sexton owner. 

    8.  Baby Redfield scopes have no E & W MOA click adjustments, but GruBee WolfPup and FoxPups do have. 

    9.  Redfield scopes have limited reticle choices and mounting rings choices.  We have AO/FF 4X scopes, Standard 4X , 4 ring choices and 5 reticle choices. 

    10.  The US Gov has been our biggest problem.   We wanted to assemble, test and package our scopes here in Durant OK but Uncle Sam desired to place a 25% duty on components. No Common sense in DC!!!!    Duty should be place on complete finished products and allow USA assembly with duty free components as a concession to Make America Great Again.    Ask your Congressman and Senator to eliminate component parts duty for established OEM's and increase duty on finished end use products from Riceland.    MAGA!!!!