5G -54T- Belt Drive Transmission Only For Predator 79cc engine

$199.00

BIG NEWS: 5G is here!

WE ONLY MADE 25 OF THESE 18T/54T/9T - 8M T-Belt TRANSMISSIONS BY EXPENSIVE CNC MACHINING PROCESS OUT OF BILLET 6061-6T ALUMINIUM TO TEST THE MARKET.

IF IN FACT WE SELL OUT DUE TO HIGH DEMAND, ALL FUTURE 5G TRANSMISSION PLATES WILL BE MADE OF CAST ALUMINUM TO CUT COST.

This is a Gru-Bee 5G- 8T/54T/9T 8M T-Belt Drive Transmission. Made for Higher speed use on flat land and / or racing;
Made exclusively for the Harbor Freight 79CC slant cylinder 4 cycle Engine. Considered the best engine choices on the market due to being readily available locally and very low cost.
GruBee 5G is the only Belt Drive Transmission currently made for this engine that we know of.
8M Belt operation is quieter than a loud noisy #35 chain drive.

GRU-BEE 5G TRANSMISSION INCLUDES THE FOLLOWING ITEMS AND FEATURES:

Centrifugal Clutch with a 18 tooth M8 Belt Drive Pulley.
Centrifugal Clutch has a needle bearing instead of a bushing.
CNC 2 piece billet transmission plate with sliding hub.
54T Freewheel 8m belt driven pulley.
9T sliding drive sprocket with ring spacers.
8M T Belt.
Final drive ratio; 18T/54T > 9T/56T = 18.6-1 which means one rear bike wheel turn to 18.6 engine rpms.
-Steel belt guard cover.
THESE ITEMS SHOWN IN THIS ADD PICTURES ARE NOT INCLUGED WITH THE 5G TRANS.

79cc PREDATOR Engine mounting bracket is not included: Order Separately: $50.00 extra
56T bike wheel sprocket is not included. Order Separately. $22.00 extra
Chrome exhaust pipe is not included. Order Separately: $22.95 extra
Gt2A Red bike Frame is not included. Order Separately: Out of stock.

FYI: Harbor Freight is your exclusive source for EPA certified Predator 79cc 4 cycle engines.

My WAG, ( wild ass guess ), is that our transmission may also fit LeFan’s 79cc vertical cylinder engine. We have not had a chance to check it out yet. We just got back from China when the airlines started flying again. We were stuck in China for 9 months.

5G -54T- Belt Drive Transmission Only For Predator 79cc engine

Grubee Inc

BIG NEWS: 5G is here!

WE ONLY MADE 25 OF THESE 18T/54T/9T - 8M T-Belt TRANSMISSIONS BY EXPENSIVE CNC MACHINING PROCESS OUT OF BILLET 6061-6T ALUMINIUM TO TEST THE MARKET.

IF IN FACT WE SELL OUT DUE TO HIGH DEMAND, ALL FUTURE 5G TRANSMISSION PLATES WILL BE MADE OF CAST ALUMINUM TO CUT COST.

This is a Gru-Bee 5G- 8T/54T/9T 8M T-Belt Drive Transmission. Made for Higher speed use on flat land and / or racing;

Made exclusively for the Harbor Freight 79CC slant cylinder 4 cycle Engine. Considered the best engine choices on the market due to being readily available locally and very low cost.

GruBee 5G is the only Belt Drive Transmission currently made for this engine that we know of.

8M Belt operation is quieter than a loud noisy #35 chain drive.

GRU-BEE 5G TRANSMISSION INCLUDES THE FOLLOWING ITEMS AND FEATURES:

Centrifugal Clutch with a 18 tooth M8 Belt Drive Pulley.

Centrifugal Clutch has a needle bearing instead of a bushing.

CNC 2 piece billet transmission plate with sliding hub.

54T Freewheel 8m belt driven pulley.

9T sliding drive sprocket with ring spacers.

8M T Belt.

Final drive ratio; 18T/54T > 9T/56T = 18.6-1 which means one rear bike wheel turn to 18.6 engine rpms.

-Steel belt guard cover.

THESE ITEMS SHOWN IN THIS ADD PICTURES ARE NOT INCLUGED WITH THE 5G TRANS.

79cc PREDATOR Engine mounting bracket is not included: Order Separately: $50.00 extra

56T bike wheel sprocket is not included. Order Separately. $22.00 extra

Chrome exhaust pipe is not included. Order Separately: $22.95 extra

Gt2A Red bike Frame is not included. Order Separately: Out of stock.

FYI: Harbor Freight is your exclusive source for EPA certified Predator 79cc 4 cycle engines.

My WAG, ( wild ass guess ), is that our transmission may also fit LeFan’s 79cc vertical cylinder engine. We have not had a chance to check it out yet. We just got back from China when the airlines started flying again. We were stuck in China for 9 months.

5G -54T- Belt Drive Transmission Only For Predator 79cc engine

Grubee Inc

BIG NEWS: 5G is here!

WE ONLY MADE 25 OF THESE 18T/54T/9T - 8M T-Belt TRANSMISSIONS BY EXPENSIVE CNC MACHINING PROCESS OUT OF BILLET 6061-6T ALUMINIUM TO TEST THE MARKET.

IF IN FACT WE SELL OUT DUE TO HIGH DEMAND, ALL FUTURE 5G TRANSMISSION PLATES WILL BE MADE OF CAST ALUMINUM TO CUT COST.

This is a Gru-Bee 5G- 8T/54T/9T 8M T-Belt Drive Transmission. Made for Higher speed use on flat land and / or racing;

Made exclusively for the Harbor Freight 79CC slant cylinder 4 cycle Engine. Considered the best engine choices on the market due to being readily available locally and very low cost.

GruBee 5G is the only Belt Drive Transmission currently made for this engine that we know of.

8M Belt operation is quieter than a loud noisy #35 chain drive.

GRU-BEE 5G TRANSMISSION INCLUDES THE FOLLOWING ITEMS AND FEATURES:

Centrifugal Clutch with a 18 tooth M8 Belt Drive Pulley.

Centrifugal Clutch has a needle bearing instead of a bushing.

CNC 2 piece billet transmission plate with sliding hub.

54T Freewheel 8m belt driven pulley.

9T sliding drive sprocket with ring spacers.

8M T Belt.

Final drive ratio; 18T/54T > 9T/56T = 18.6-1 which means one rear bike wheel turn to 18.6 engine rpms.

-Steel belt guard cover.

THESE ITEMS SHOWN IN THIS ADD PICTURES ARE NOT INCLUGED WITH THE 5G TRANS.

79cc PREDATOR Engine mounting bracket is not included: Order Separately: $50.00 extra

56T bike wheel sprocket is not included. Order Separately. $22.00 extra

Chrome exhaust pipe is not included. Order Separately: $22.95 extra

Gt2A Red bike Frame is not included. Order Separately: Out of stock.

FYI: Harbor Freight is your exclusive source for EPA certified Predator 79cc 4 cycle engines.

My WAG, ( wild ass guess ), is that our transmission may also fit LeFan’s 79cc vertical cylinder engine. We have not had a chance to check it out yet. We just got back from China when the airlines started flying again. We were stuck in China for 9 months.

You may also like...