Baby Redfield Replacement > WP-3A 3/4" WolfPup 4X PCH, scope includes LOW rings and lens covers



WP-3A >  3/4" tube WolfPup 4X-24       PCH = Post Cross Wire Reticle.   

  • 4-inch eye relief  

  • 45 yd. parallax   

  • 9-1/4" long   5.8 oz. wt.   

  • Includes wp-ab 2 side screw low rings,

 Perfect Replacement for the famous 4X baby Redfield made long ago in Denver CO.    Made Famous when Browning issued it with their SA 22 semi auto 22.  

  • For use on the Winchester EXPERT 22 use our one piece 6" long 3/8" dovetail base.     

  • For use on a Browning SA semi auto 22 use our barrel mount cantilever base ID to what Redfield made.  

  • FREE USPS PRIORITY SHIPPING in United States only, 

  • Wolf Pup 4X-24 PCH Scope > Post Cross Hair reticle, 

  • Scope P/n WP-3A 

  • Includes Low Mounting Rings P/n: WP-AB.   

  • To substitute different rings send seller at note of your ring choice at check out.    

    • To see all ring descriptions look at our individual ring adds. 

  • Replaces the famous baby Redfield 4X made long ago in Denver CO.  

  • Comes complete with 3/8" dove tail low mounts for 22 grooved receivers.

  • Includes Lens Covers: 

  • PCH Post Cross Hair reticle gets fast target acquisition, reminiscent of WWII German sniper rifles!

  • 3/4" tube small scope for a 22 rifle.   

  • 8 Fully Multi Coated Lens   ( Green tint, not the cheap blue tint )

  • 1/4" MOA clicks at 45 yds.  Yes, you can hear the clicks!!!! 

  • The Original Baby Red only had a smooth turn adjustment.

  • 4-inch eye relief.   If you want 3" eye relief order FP-1A. 

  • 45 yd. parallax   

  • 9 1/4" long   5.8 oz. wt.

  • Bright high luster black finish like the original.

  • This is an Adult scope suitable for 14" to 13-1/2" trigger pull.  Not for youth rifles with short trigger pulls for which our FoxPup scope is better suited.   

    • For rifle fit please know 4-1/2" is the tube length measurement between Ocular and Objective bells.   

    • NOTE: Our WolfPup scopes do not fit the old Weaver 3/4" stamped steel side mounts without grinding out clearance midway on the mount base to allow scope turret clearance fit.     

  • Satisfaction guaranteed.   

    FREE USPS PRIORITY SHIPPING in United States only,   

  • US DEPT OF COMMERECE prohibits the Shipping of Riflescopes to Canada.  


    We warmly welcome and appreciate customer feedback.   Let us know what you're thinking. 

    Logic to consider if you want a shootable scope to use.   However, if you want a non-shooter show case antique, then yes, buying an old Baby Redfield may have merit.     

    Prices of used Baby Redfield 4X scopes have gone from $250 10 years ago on eBay for one in like new condition down to $150 today as was sold at the Wannemacher Gun Show in Tulsa last April 2023., Therefore, if you are knowledgeable in scope use, I fail to see REDFIELD value maintained.    Yes, we bought many to determine how to make a better one. 

    1.   Every scope has a clock in it.   

    2.   Over time all will eventually lose gas fill, and interior components contaminated,  ie: O-rings and springs, reticle and glass degradation. 

    3.   The last Redfield scope was made in 1998.     

    4.   If you were to buy a Baby Redfield from eBay that was the last one made your scope would be 25 years old at minimum or perhaps 50 years old at maximum age. 

    5.  Used Redfield scopes carry no warranty.    You get what you get.   Ours have Limited lifetime warranty.  Don Grube's lifetime, not the scopes! 

    6.  Many people have told us they bought a used Redfield and had to have it repaired by a scope rebuilder.    

    7.   Iron Sight Co. in Tulsa OK is a major scope rebuilder if it turns out you need their service.  ph. 918 306 0514     Mike Sexton owner. 

    8.  Baby Redfield scopes have no E & W MOA click adjustments, but GruBee WolfPup and FoxPups do have. 

    9.  Redfield scopes have limited reticle choices and mounting rings choices.  We have AO/FF 4X scopes, Standard 4X , 4 ring choices and 5 reticle choices. 

    10.  The US Gov has been our biggest problem.   We wanted to assemble, test and package our scopes here in Durant OK but Uncle Sam desired to place a 25% duty on components.  No Common sense in DC!!!!    Duty should be placed on complete finished products and allow USA assembly with duty free components as a concession to Make America Great Again.    Ask your Congressman and Senator to eliminate component parts duty for established OEM's and increase duty on finished end use products from Riceland.    MAGA!!!!